General questions about flex ovens and multi-drawers
Yes, for the BORA X BO too, end customers have the chance to make use of the 2+1 warranty extension by registering. A corresponding information sheet with exact instructions is included with the BORA X BO.
Product BORA X BO
Steam extraction gives you a clear view: the steam is automatically extracted through the back of the oven chamber before the door is opened. This prevents the user from being enveloped in a cloud of hot steam and prevents odours from forming. The best results are obtained when the steam is allowed to be completely drawn away.
The four food supports, odour filter, cleaning cartridges and spacers provided upon delivery of the BORA X BO are available as accessories in the BORA Shop.
Four food supports are included: a universal tray, an oven rack, a perforated stainless steel steamer tray and a non-perforated stainless steel steamer tray.
Yes. This prevents children from switching on the BORA X BO accidentally while playing. Users can activate the childproofing feature in the settings, where they can also set a PIN. This must be entered to disable the childproofing feature, operate the appliance as normal again and access all functions.
Universal tray, oven rack, stainless steel steam trays – perforated or non-perforated, cleaning cartridges, odour filter, frame spacer, floor unit installation set.
Yes, the BORA X BO can be installed inside a 60 cm deep standard oven unit. An unobstructed 160 cm² ventilation cross-section from the plinth is to be taken into consideration, as well as a distance from the back of the appliance to the wall of at least 30 mm.
Installation of a non-BORA cooktop above the BORA X BO is not recommended due to possible interference and would be at the user’s own risk. Installation under a BORA cooktop is not possible due to restrictions in terms of space and insufficient ventilation, which would be the case with this set-up; other appliances (dishwasher, built-in coffee machine, etc.) can be installed above or below the BORA X BO if the specifications for installing the BORA X BO and the other appliance are taken into account.
Yes, the BORA X BO needs to be on for Wi-Fi updates.
The BORA X BO CANNOT be installed under a BORA cooktop extractor system as the heat radiated may damage the components of the BORA cooktop extractor system: the operating and power electronics of BORA components must not be exposed to temperatures over 65°C.
Yes, the BORA X BO can only be operated with mains water and waste water connections. It is possible to present the BORA X BO in a display without it being connected to the water supply.
Mains water connection – ¾” connection;
¾” waste water pipe siphon connector, 19 to 22 mm hose connection, maximum waste water pipe length – 2,5 m, must not be extended, only use the hoses provided;
Single-phase 220–240 V supply voltage, 1 x 16 A, A fuse protection, two-phase 380–415 V supply voltage, 2 x 16 A fuse protection, 50 Hz frequency, maximum 6.1 kW power consumption, maximum 6.1 kW power rating
Yes, it can: in this case, the pump motor and fan stop running, similar to when the door of a dishwasher is opened when it is in operation. The pump motor and fan stop running, similar to when the door of a dishwasher is opened when it is in operation.
The BORA X BO informs the user that intensive cleaning is required, or the time until the next intensive cleaning can be seen on the appliance. There is an animated film for intensive cleaning under Settings in the device. During intensive cleaning the BORA X BO cleaning cartridge is screwed into the space provided in the oven rack. The cleaning process is started by selecting the intensive cleaning programme. It takes 3 hours 45 minutes. Hot steam and the environmentally friendly active ingredients in the BORA X BO cleaning cartridge descale and clean thoroughly, promoting a long service life. The cartridge made from recyclate can be disposed of as plastic waste after use and recycled.
This unique function is particularly useful for holiday homes or temporary rentals. When guest mode is enabled, guests can only access the most relevant functions of the BORA X BO. This prevents misuse by guests. Furthermore, it prevents modification of the actual user’s customised settings. When activating guest mode, the user specifies a four-digit PIN that is required to exit guest mode again.
The BORA X BO comes with a cleaning cartridge as standard. This cartridge is very easy to use: it is simply screwed into the oven rack and ensures optimum performance thanks to its dual chamber system (1 chamber for cleaning, 1 chamber for descaling). The cleaning cartridge contains environmentally friendly active ingredients, and thanks to the wax seal it is not necessary to remove any covers. The cartridge itself is made of recycled plastic and can be disposed of with the plastic waste after use.
The user is always informed about available updates by a message in the display. They confirm this in the same way as they would on a smartphone or similar device.
It leads to the technical service contact page with a UIFN (Universal International Freephone Number) and email address.