The alternative to the conventional rangehood: the downdraft extractor

The rangehood is a very useful tool in the kitchen. It draws in cooking vapours – so-called waste steam – and stores particles and odours in filters. This principle is the same with all rangehoods, whether exhaust air or recirculation models. The result: fresh air in the kitchen; the room and your clothes do not smell of food for hours afterwards and the kitchen units and walls are not covered with a sticky layer of grease. So far, so good. However: despite all of its uses, the conventional rangehood also has its drawbacks.

Disadvantages of the rangehood

Disadvantage 1: Lack of headroom

You’d be hard pushed to find someone who hasn’t hit their head on a rangehood at one time or another. Not surprising, seeing as they’re installed at head height over the cooktop to catch cooking vapours as they rise. Bumping your head on the hood can be quite painful. This is why special hoods are now available on the market that are out of reach. But these slanting or flat-to-the-wall extraction systems designed to give you more headroom require space over the cooktop, which takes us to the second drawback of rangehoods.

Disadvantage 2: No storage space

Even in the case of space-saving extractor solutions, the appliance takes up room that could be used for wall units. Extractors built into the kitchen units such as integrated, visor or telescopic extractor hoods still leave only enough room for a narrow spice rack. In smaller kitchens especially this can be a real challenge for kitchen planners – and if they can’t solve the problem, it then becomes a problem for the person using the kitchen. (Photo: Modular Küchen)

2019_Druck_BORA_X-Pure_PUXU_PUXA_Goldkueche_ISOcoaV2_4.jpg

Disadvantage 3: It spoils the appearance of an open kitchen

Even in larger kitchens, rangehoods often pose a problem for architects, especially when the design is open plan with a kitchen island. Island hoods, which hang from the ceiling, always disrupt the view. This is why design lovers prefer to opt for rangehoods that are built into the ceiling – provided that there is a power supply above the cooktop. In older buildings, for example, this is rarely the case. Such ceiling extractors have another drawback: on the ceiling they are further away from the cooktop and don’t draw away cooking vapours as effectively. The cooking vapours are dispersed in the air before they can get there.

Disadvantage 4: the noise of the rangehood

In many kitchens it’s impossible to have a conversation when the extractor is on. Here are a couple of figures that explain why: on average, the volume of a rangehood when running is approx. 63 decibels. A conversation between two people usually takes place at a volume of between 50 and 60 decibels. What’s more, the motors in the rangehood which are responsible for the noise are at head height, whether its a conventional or built-in rangehood, meaning that it’s right there where the conversation is taking place.

Disadvantage 5: Difficult to clean

If you use your rangehood often, it will need cleaning from time to time. Although you can remove parts like metal filters and clean them in the dishwasher, you need to wipe and scrub the surfaces of the rangehood by hand – both inside and out. This is a time-consuming job that can be quite hard work. What’s more, it’s impossible to reach all areas of many rangehoods without a ladder.

THE SOLUTION: THE DOWNDRAFT EXTRACTOR

Advantage 1: Clear View

As the extractor is built into the cooktop, an annoying extractor hood at head height is no longer necessary.

Advantage 2: Ultimate design freedom

Whether wall units all round, cooking by the window or a minimalist kitchen design, kitchen planners no longer need to worry about a rangehood.

2019_Druck_BORA_Classic_2xCKFI_ausgezeichnetes_Design.jpg

Advantage 3: Exceptional quality and design

Execptional quality - BORA is both designed and made in Germany.
Numerous design awards for BORA are proof of this: the downdraft extractor makes for a whole new, elegant kitchen design.